
1. Get the scope in writing, item by item
The most common AMC dispute is "that is not covered". A good contract lists the equipment it covers: switches, routers, Wi-Fi, servers, PCs, printers, UPS, and if you want them, CCTV, access control and attendance. Anything not on the list is outside the contract.
Ask specifically about software. Supplying antivirus or backup software, or managing cloud services such as Microsoft 365, is often excluded or charged separately.
2. Preventive visits: how often, and what happens on them
"Quarterly visits" means little without a checklist. Ask to see the visit checklist for each type of equipment, and ask for a written report after every visit. Reports are your evidence that maintenance actually happened.
3. Response times that match how critical each system is
A dead network at a logistics company stops work; a faulty printer does not. Response times should be written into the contract, and they can differ by system. Check what counts as a response: a phone call, a remote session, or an engineer on site.
4. Parts: included or charged?
Some AMCs include common parts, others charge every part at cost. Neither is wrong, but you should know which you are buying. For older equipment, ask what happens when a part is no longer available.
5. Out-of-hours cover
If your operation runs evenings, Sundays or around the clock, check whether faults outside office hours are covered, and at what cost.
6. One contract or several?
Many Dubai companies have one AMC for IT, another for CCTV and a third for access control and attendance. When a fault sits between them, such as a switch that powers the cameras, each provider blames the other. One contract that covers network, IT and ELV systems together avoids that.
7. Taking over from another provider
Before a new provider takes over, they should inspect your systems and list existing faults, so you know what is being inherited. Make sure you hold the admin passwords, configurations and drawings, not just the outgoing provider.
Start from an accurate equipment list
An AMC can only be priced and delivered against a list of what is actually installed, so ask for an inspection before signing rather than relying on an old asset register or the previous provider's contract.
For each item, the list should record:
- make, model, serial number and location, such as "24-port PoE switch, ground floor rack"
- age, and whether it is still under the manufacturer's warranty
- firmware or software version
- how critical it is: does a fault stop work, or only slow someone down?
Ask for the list to be updated whenever a device is added, moved or replaced. Kept up to date, it also shows which equipment is near the end of its life, which helps when you plan next year's budget.
Visit frequency: match it to the site
Monthly visits suit busy or regulated sites, quarterly visits suit most offices, and half-yearly visits are usually enough for small systems. Frequency is one of the main things an AMC price is built from, so set it per site rather than paying one rate for everything.
Dust and heavy use are the usual reasons to visit more often. Warehouses and residential towers, for example, benefit from monthly checks of CCTV recording and hard drive health, because a failed drive is often discovered only when someone needs the footage. A quiet office with a small rack can usually go longer between visits. Our CCTV maintenance page lists what a camera visit should check.
Small changes and leavers
Agree in writing how small changes are handled, because they come up regularly between visits. Typical examples are enrolling a new starter on the attendance system, changing a door's access control rules or moving a camera view.
Some contracts include small changes up to an agreed amount; others charge each one as a call-out. Either can work, as long as the limit is written down.
Removing leavers matters as much as adding starters. Each preventive visit should include taking former staff off the access control user list and the CCTV viewing app, so a former employee's card or phone login no longer works. Ask for the current user lists after each visit so HR can check them against the staff list.
Questions to ask every IT AMC company
- Which of our devices and systems are covered, by name?
- What exactly happens on a preventive visit, and do we get a report?
- What are the response times, and how are they measured?
- Are parts included? Which ones?
- Are evenings and weekends covered?
- Can CCTV, access control and attendance go in the same contract?
- Who holds our passwords and configurations?
Our own answers are on the IT AMC page, including what we do not cover.
Questions
Is a PC and server health check the same as managing backups?
No. A health check confirms that updates, disk space, backup status and antivirus status are in order. Supplying backup or antivirus software, or administering cloud services such as Microsoft 365, is usually outside a maintenance contract, so check who is responsible for it.
Does an AMC help with SIRA renewal for CCTV?
Yes. A SIRA-certified CCTV system has to keep working to pass its next audit, and records of regular maintenance visits make the renewal more straightforward.
What should we include when reporting a fault?
The site, the system and device affected, when the problem started and, if possible, a photo or short video. A clear report often lets the fault be checked, and sometimes fixed, remotely before an engineer visits.
Should equipment still under warranty go in the AMC?
Usually, yes. A manufacturer's warranty generally covers repairing or replacing a faulty unit, not preventive checks, configuration changes or the work of finding which device has failed, so the warranty and the AMC do different jobs.