
The same kind of system, set up differently
Home automation vs office automation is not a choice between two technologies. Both put lighting, AC, blinds and curtains on one control system. What differs is the set-up: what triggers the system, who uses it and how it is installed.
Onexpertis offers both as one service, home and office automation in Dubai. This article sets the two projects side by side, so you know which questions apply to yours before you ask for a quote.
The differences at a glance
The equipment overlaps, but the brief does not. The table shows where the two projects part ways.
| Home (villa or apartment) | Office | |
|---|---|---|
| Spaces | Entrance, living room and majlis, bedrooms, garden and pool | Meeting rooms, open-plan floors, reception and lobby |
| What is controlled | Lighting, AC, blinds and curtains, plus garden lights, pool pump and irrigation | Lighting, AC and blinds, room by room and zone by zone |
| Main trigger | A scene someone chooses, such as morning, guests or cinema | Schedules for opening and closing, and occupancy sensors in empty rooms |
| Who uses it | The household | Staff and visitors in each room, and whoever manages the floor |
| Controls | Wall keypads, phone app, wall tablet, voice | A room control panel or keypad by the door, plus tablet, app or voice |
| Security link | Video intercom, smart lock and cameras at the entrance | A closing scene that locks the doors and switches off lights and AC on every floor |
| Installation route | Wireless retrofit in a finished home, wired system in a new build | Wired system in a fit-out; a finished office is assessed on the site visit |
What gets controlled
A home adds the entrance and the outdoors to the shared core of lighting, AC, blinds and curtains: porch and driveway lights on arrival, garden lights at sunset, and the pool pump and irrigation on timers.
An office repeats the same few functions across many rooms: a control panel in each meeting room, lighting zones on open-plan floors, and opening and closing scenes for reception and the lobby. The lighting types, AC systems and sensors that can be connected are listed under smart lighting and climate control.
How it is triggered: chosen scenes or schedules and sensors
A home runs mostly on scenes the family chooses. An office runs mostly on schedules and occupancy sensors that nobody has to touch.
At home
A scene is a preset recalled with one button: morning, guests, cinema or evening. Schedules play a supporting part, such as bedroom blinds on a schedule and the AC set back at night.
In an office
An office floor has no single person to press the button, so the system acts by itself. Scheduled scenes open and close the floor, so it is lit and cool when the first people arrive and the lights and AC go off at closing. Occupancy sensors switch off lights and AC in empty meeting rooms and zones, and daylight harvesting dims the lights near windows.
The meeting room is the exception: it works more like a room at home, with one-touch scenes for a presentation or a discussion. See the guide to room control for meeting rooms, or the office automation in Dubai page for the office side as a whole.
Who uses the controls
At home the users are a few people who know the system. In an office they include people who have never seen it before.
A household can use the phone app, a wall tablet or voice control through Alexa, Google Home or Apple HomeKit, alongside the wall keypads.
In an office, the control has to make sense to a visitor who does not have the app. That is the job of the room control panel by the door of each meeting room, with scenes set once and recalled with one button. Whoever manages the floor has the tablet, the app and an energy consumption dashboard that shows the effect of the schedules and sensors.
Retrofit, new build or fit-out
The installation route depends on the state of the building, not on whether it is a home or an office.
In a home you already live in, wireless switches and modules fit behind the existing switch plates and in the AC controls, with little or no chasing of walls, one room at a time.
In a new villa or an office fit-out, a wired system is planned with the MEP drawings and its control cabling is run before the ceilings close. It is more reliable for large villas and offices and easier to extend later, so involve the installer before first fix.
A finished office can usually be automated too; the approach is confirmed on the site visit before quoting.
The protocol follows from these decisions, not the other way round. We work with KNX, Zigbee, Z-Wave and Wi-Fi devices and recommend one on the visit, depending on the property.
Either way, the automation runs on the property's network. Plan a network point or Wi-Fi coverage where wall tablets and any hub will sit, and treat network cabling and Wi-Fi as part of the same project.
How security ties in
Cameras, smart locks and a video intercom can join the same scenes in a home and in an office, but the scenes do different jobs.
At home the focus is the entrance and the night: the porch camera opens on your phone when someone rings, the lights come on if the alarm triggers at night, and a leaving scene locks the doors and turns off the AC.
In an office the focus is closing time: one closing scene locks the doors and switches off the lights and AC on every floor.
The components are listed under integrated security automation. Decide early whether security is in scope, so it is surveyed and quoted with the rest.
What to decide before asking for a quote
The most useful preparation is a list of rooms and what each should do. Settle these points first.
- The property and its stage. Villa, apartment or office floor; finished, under fit-out or still on drawings.
- The rooms and what to control in each. Lighting, AC, blinds, curtains, or outdoor items such as garden lights, with the rooms in order of priority.
- The triggers. For a home, the scenes you want. For an office, the opening and closing times and the rooms that are often empty.
- The users. Who will use the controls, and from what: a keypad, a tablet, the app or voice.
- The AC. The type of system and, if you have it, the model.
- Security. Whether cameras, smart locks and the intercom should be linked, and what is already installed.
- Drawings and dates. A floor plan, plus the MEP drawings and the first fix date for a new build or fit-out.
On the visit we check the lighting circuits, the AC model and where keypads and sensors can go, then quote room by room.
Questions
Can the AC we already have be connected?
Usually, yes. Split units, VRV/VRF systems and fan coil units can be connected, and the model is checked on the site visit.
Do the controls still work if the internet goes down?
Wall keypads and schedules keep working on the local system. Only control from outside the property needs the internet.
Can cameras we already have be linked to the automation?
If they are IP cameras that support ONVIF, usually yes.
Can we start with a few rooms and add more later?
Yes. A common starting point is lighting and AC in the main rooms, with blinds, garden and security added later. The quote is prepared room by room, so the work can be phased.